I was recently commissioned to design and make bespoke Oak planters for the Lucy Summers feature garden at the Country Living Fair at The London Business Design Centre, which runs from Wednesday 18th March until Sunday 22nd March.
Lucy Summers feature garden Country Living Fair
My planters are handcrafted using locally sourced Oak from Devon and have been used as corner pieces to frame the overall design, as seen in the picture above.
Below, this is how they looked before delivery to the show.
In comparison with a large full sized yurt, a mini yurt is light weight, easy to assemble, highly portable and takes up less space when pitched. Crafted from hardwood timber locally sourced from Devon woods, these small yurts are designed for a variety of uses for both children and adults. A seven foot yurt can sleep two adults and are a great alternative to ordinary tents.
Mini yurt by the estuary at Tregunna, Cornwall
Our small yurt on show in the gardens at Coombe Trenchard
For more information please see website page about mini yurts.
These Oak gates were designed and made for a customer using greenwood. The gates were styled to fit in with their surrounding environment. They also needed to be livestock and deer proof.
To make these gates the green Oak round wood was split into quarters using steel wedges. A froe was used to cleave these quarters into the thinner pieces used to make the individual gate components.
The rough cleft Oak was smoothed and shaped further using a draw-knife. The greenwood was left to partially season for a number of weeks before the final cutting and assembly of the gates took place.
After the Oak had been rested, the next stage was to mark and cut all the tenons and mortices prior to assembly. The rails were carefully chosen in pairs to ensure a degree of continuity between both gates. This design uses five rails and these are fixed using stainless steel nails. Stainless steel nails are used to limit the chemical reaction of the tannic acid naturally present in Oak with the metal, this avoids dark stains appearing on the wood, which you would eventually get with galvanised or other non-stainless steels grades of nails.
Finally, the vertical pales and diagonal braces were cleft, cut, shaped and fitted to the gates.
All our rustic gates are individually designed and handmade for each customer in either Oak or Sweet Chestnut. For further details, please email firstname.lastname@example.org or phone (01409) 281549 to discuss your requirements.
This project involved making a number of bespoke Sweet Chestnut panel infills, which were installed in the upper area of a barn. Sweet Chestnut had been used for the roofing components, so the customer was looking for the same wood to be used. The stair ladder and upright pieces to hold the Chestnut panels were made by a carpenter using reclaimed Oak. Due to the variability of the Oak pieces, each Chestnut panel was different in size and was custom made to fit each section.
The handrails of the stair ladder were made from Sweet Chestnut and contrast the darker reclaimed Oak frame and treads.
The panel spindles were made from cleft Sweet Chestnut pales, which were installed into mortices made in the outer frame. A froe is used to split the wood down the grain and a drawknife used to smooth the surface of the pales. The panels have a unique handmade look that blends in with the stone, exposed beams wood and thatched roof of the barn.
Greenwood was used for all the Sweet Chestnut components. The final piece was a bespoke gate made to fit at the top of the stair ladder. This was designed so that the gate could only open inwards, which was achieved by extending the top left section of the gate.
This a good example of using green Sweet Chestnut for various interior components.
Here are some examples of bespoke Sweet Chestnut gates and fencing that can be handmade to order. The Sweet Chestnut is coppiced sustainably from woodland, which provides a regular supply of quality wood to create naturally durable products. The wood is used green i.e. not kiln dried or air dried after removing the bark and much of the sapwood. Various green woodworking tools are used, such as a froe, draw knife, twybil, axe, to shape the Chestnut gates and fencing into the finished pieces.
Natural shapes, bends and twists in the wood are incorporated into finished product to create distinct one off pieces.
Products can be made in a range sizes, shapes and styles, so you can let you imagination run wild…
What’s more coppiced woodland has a positive outcome for biodiversity, therefore by buying any wood products sourced from any coppiced woodlands directly supports future habitat management as well as the rural economy.
There is always a good stock of Sweet Chestnut available in various sizes and lengths, so if you require something specially made to order or need to source some materials for your own green woodworking project, then we are happy to discuss your requirements.main website