Category Archives: post and rail

Type of fencing where a number of rails connect to their adjacent posts

Bespoke Cleft Chestnut Panels

This project involved making a number of bespoke Sweet Chestnut panel infills, which were installed in the upper area of a barn. Sweet Chestnut had been used for the roofing components, so the customer was looking for the same wood to be used. The stair ladder and upright pieces to hold the Chestnut panels were made by a carpenter using reclaimed Oak. Due to the variability of the Oak pieces, each Chestnut panel was different in size and was custom made to fit each section.

Array

The handrails of the stair ladder were made from Sweet Chestnut and contrast the darker reclaimed Oak frame and treads.

Array

Array

The panel spindles were made from cleft Sweet Chestnut pales, which were installed into mortices made in the outer frame. A froe is used to split the wood down the grain and a drawknife used to smooth the surface of the pales. The panels have a unique handmade look that blends in with the stone, exposed beams wood and thatched roof of the barn.

Array

Greenwood was used for all the Sweet Chestnut components. The final piece was a bespoke gate made to fit at the top of the stair ladder.  This was designed so that the gate could only open inwards, which was achieved by extending the top left section of the gate.

Array

This a good example of using green Sweet Chestnut for various interior components.